|
2.4G WIRELESS Module adapter
2.4G WIRELESS Module adapter for Car Reverse Rear View backup Camera
Product Description
Connect the Vehicle backup camera or front car camera to you front TFT-LCD wireless.
A small universal 2.4Ghz wireless video transmitter and receiver designed for use with vehicle backup, parking assist and RV cameras.
Product Features include: 2Ghz Wireless Video Transmitter and Receiver;
Working distance up to 6 meters;
Eliminates the need to run a video cable through the vehicle;
Output Power: 100MW;
Power Input: 9-14V DC;
Input/Output Signal: PAL/NTSC;
Sensitivity: -85 Dbm;
Connector: Optional (RCA, Min-din, 2.5mm jack);
Max Transmission Distance: 100m (open area);
Working Temperature: -20 degreeC ~ 80 degree.
Working distance up to 6 meters;
Eliminates the need to run a video cable through the vehicle;
Output Power: 100MW;
Power Input: 9-14V DC;
Input/Output Signal: PAL/NTSC;
Sensitivity: -85 Dbm;
Connector: Optional (RCA, Min-din, 2.5mm jack);
Max Transmission Distance: 100m (open area);
Working Temperature: -20 degreeC ~ 80 degree.
How to Install a Camera with the Wireless Module:
- Take out your stock license plate light at the back of your car.
- Fix the camera to where the stock license plate light was.
- Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power
- Connect the wireless module (transmitter) to your camera via the two cables - yellow plug for AV output and black plug for power
- Connect the wireless module (transmitter) to the reverse light of your car to get the power - red wire for positive and black wire for negative
- Connect the wireless module (receiver) to your car monitor - yellow plug for AV input.
- Connect the wireless module (receiver) to your car battery or cigarette lighter to get the power - red wire for positive and black wire for negative
- You will see the images when your reverse car.